XBODY Australia Pty Ltd
PROVEN BUSINESS CONCEPTS WITH XBODY XBody’s goal is to see you and your EMS business succeed. That is why we don’t just sell equipment, we provide know-how, expert knowledge, business support…
read moreAs local governments look to achieve net zero emissions by 2050, Michael Cook, Principal at Hunt Architects, has highlighted how aquatic assets present a substantial and immediate challenge.
Suggesting that councils could be missing a trick by focusing on plant upgrades alone, Cook suggests “swapping end-of-life or inefficient plant for modern technologies is only half the opportunity.
“Poorly performing building envelopes represent a ready issue to be addressed, with refurbishment offering compounding benefits when combined with plant upgrades.”
Modelling shows energy savings in excess of 55% are achievable with a high-performance building envelope compared to a typical aquatic centre.
Insulation, glazing, airtightness and the prevention of thermal bridging can all help bring council-owned aquatic assets closer to net zero.
However, much of the recent focus has been on plant upgrades alone and the switch to all-electric systems compatible with renewable energy sources. This has been driven in part by the availability of grants, rebates and innovative capital deferring options.
Cook points out “most councils are currently fixated on the shocking energy bills and early failures of mechanical plant. As a result, there is a still a lot of confusion and anxiety in councils about how best to proceed
“But reaching for net zero is not simply about the systems and technology and a like-for-like swap in terms of plant capacity. It’s also about driving efficiencies in the use of energy so that demand is reduced.
“Get the passive, set-and-forget elements right in terms of the building envelope and you can drive down capital expenditure simply by reducing the size of the plant required.
“And with lower operating costs, a centre can draw closer to budget neutrality, returning funds for programs and stabilising entry costs, or simply lowering council overheads.”
Operating 24/7, with high internal operating temperatures (relative to ambient air) and high chemical content, council-owned aquatic assets have disproportionately high carbon footprints.
Glazing typically releases its heat eight to nine times faster than an adjacent wall, while skylights release a staggering 17 times more energy than the adjacent roof. Even a typical insulated wall consumes over 30% more energy to keep warm than a high-performance wall.
A 2019 study by Dr Jean Jonathan Duverge of the Northern Environmental Design Pty Ltd (Energy performance and water usage of aquatic centre, RMIT Dissertation: Abstract) benchmarked “the energy consumption of aquatic centres ranged between 648 kWh/m2 and 2,283 kWh/m2”.
This means some centres are using 3.5 times more energy for every metre of floor space compared to their more energy-efficient counterparts.
For those centres facing a bigger net zero challenge, it’s especially good news that the benefits of plant upgrades can be multiplied when combined with general refurbishments.
Cook points out that retrofit approach can also bring significant health and wellbeing benefits for staff and patrons, noting “these include upgraded air quality through improved circulation, temperature comfort and reduced odours.
“Most retrofit options can be undertaken while the centre is operating and most result in a set-and-forget or low-maintenance outcome. Air quality and condensation issues are also improved.
“With the drive for net zero, it’s well worth councils sitting down with an aquatic centre design specialist who can assess the specific needs and challenges, recommend tailored solutions and model the savings, advise on the grants and rebates available in each state, and look after the refurbishment project from start to finish.”
An architect with 15 years’ experience in aquatic building design, Cook is a specialist industry guest tutor at the University of Melbourne Studio 21, working with students studying a zero-carbon aquatic centre.
He recently led the delivery of Fit2Swim in Maroubra, NSW, which costs no more than $100 week to run before implementing solar. With energy costs lower than most modern homes, the new Sydney swim school is outperforming even the best-practice benchmark by about 8 times at 78 vs 648 kWh/m2/annum.
Fit2Swim is a prototype for Hunt Architects’ leading-edge work with other Australian aquatic centres.
Hunt Architects is a specialist in aquatic centre design and refurbishment, offering cutting-edge innovations and retrofit solutions.
Images: Hunt Architects' aquatic facility concept designs (top and middle) and Michael Cook (below). Credit: Hunt Architects..
22nd November 2021 - Summit to present how embracing technology will drive revival of aquatic, fitness and recreation facilities
15th November 2021 - AMCS and Climate Council respond to Australia’s contribution at COP26
14th November 2021 - Opinion: Are today’s aquatic recreation centres really serving the community?
14th November 2021 - IAKS releases project case studies from aquatic centres around the world
12th November 2021 - New Royal Life Saving research shows social impact of the aquatic industry
12th November 2021 - COP26 and its implications for sport
10th November 2021 - WTTC launches Net Zero Roadmap to guide global tourism
29th October 2021 - Populous designs world first net zero carbon arena
28th October 2021 - Australian Government called upon to firm up environmental commitments ahead of COP26
11th October 2021 - Supreme Heating technology reduces energy costs at Bundaberg’s Isis War Memorial Swimming Pool
6th October 2021 - Study ranks Wavegarden Cove as most energy efficient surf park technology
2nd September 2021 - Leisure and recreation planners need to take more decisive action on climate and weather change
5th May 2021 - Tweed Shire steps up renewable energy program
3rd September 2020 - City of Vincent commits to $2.9 million in improvements at Beatty Park Leisure Centre
1st July 2020 - Cities of Sydney and Adelaide power aquatic centres and sports fields with 100% renewable energy
31st January 2020 - Gas bill shock triggers revolution in energy-efficient aquatic centre design
14th March 2019 - New Gippsland Regional Aquatic Centre to make use of geothermal energy technology
15th December 2018 - Albany Leisure and Aquatic Centre swaps gas heating for renewable energy
13th September 2017 - Venues around the world make increasing use of renewable energy
21st April 2017 - Sunbather offers a solution to soaring energy costs for Sydney pools
13th April 2016 - Report suggests new technologies could deliver significant energy savings for aquatic centres
1st April 2016 - Aquatics and Recreation Victoria releases energy benchmarking study for aquatic centres
5th March 2015 - Vale: Peter Hunt Architect
28th August 2013 - Environmentally friendly technology to be installed at Hornsby Council’s new Aquatic Centre
Support our industry news service
We hope that you value the news that we publish so while you're here can we ask for your support?
As an independent publisher, we need reader support for our industry news gathering so ask that - if you don't already do so - you back us by subscribing to the printed Australasian Leisure Management magazine and/or our online news.
The Complete Guide to Leisure Industry Products & Services.
PROVEN BUSINESS CONCEPTS WITH XBODY XBody’s goal is to see you and your EMS business succeed. That is why we don’t just sell equipment, we provide know-how, expert knowledge, business support…
read moreOriginally founded to meet the specific training requirements of its own venue management operations, Ampd Academy now embraces a broader mission to combat skill shortages across Australian…
read moreHadley Australia and Series Australia Pty Ltd are the leading quality theatre chair manufacturers in the southern hemisphere. The businesses work closely with architects, interior designers and…
read moreAPT (Advanced Polymer Technology) is the leading global manufacturer of polyurethane-based materials, acrylic coatings and synthetic turf products for sporting and recreational applications. From…
read moreProSlide is the global leader in water ride design and manufacturing, supplying high-performance water attractions to new and expanding water parks around the world. For over three decades, ProSlide…
read moreTicketworx (formerly House of Tickets) is Australia and New Zealand’s foremost ticket specialist servicing some 2,700 clients and producing in excess of 30 million per tickets per annum.…
read moreThe Jump Pad is a safe, flat inflatable made in a variety of sizes which can be used indoor or outdoor. From 3mx3m up to a whopping 9mx21m. Markets include Indoor and outdoor playgrounds, schools,…
read moreHidroplay welcomes you to the exciting world of children's Playscapes, waterslide's and Water Attractions. Appealing to families, Hidroplay increases patronage in your facility during those…
read moreGet your business noticed in our targeted directory. Viewed by 10,000 industry professionals per week!